IBEDA gas manifolds for Acetylene comply with DIN EN 14114 and TRAC 204, 206 and 208. They are mounted on a stainless steel plate and are BAM tested and approved. The modular design provides highest flexibility in installation and ensures to meet the customer‘s requirement. The whole capacity range up to 1503 m3/h can be covered by this modular concept.
IBEDA Gas manifold systems
for technical gases
Gas manifolds, tapping points and gas distributors
IBEDA as a manufacturer supplies gas manifolds for various fuel gases such as Acetylene (according to EN 14114), Hydrogen, Methane and Propane as well as for Oxygen and other high pressure compressed technical gases such as Nitrogen, Argon and CO2. The individual components of the Oxygen supply systems are all tested for Oxygen burnout. From the high pressure connection hose (according to EN 14113), collection pipe with high pressure non-return valves (check valves) to flashback arresters (according to EN 15615) IBEDA offers our gas manifold systems in stationary and mobile designs.
Central gas supply
for all points of use
Printversion IBEDA Gas manifold systems
1Gas manifold 2x2 cylinders Nitrogen
Type: GMS-DV-BT-300/20-2x2
2Gas manifold 2x1 bundle Acetylene
Type: GMS-BKH-SSE-U13-25/2,5-SIMAX8NH-2x1
IBEDA gas manifolds for Acetylene according to DIN EN 14114 for a working pressure of 2.5 bar are required for special applications, such as high-velocity flame spraying. All safety-relevant components are BAM tested and approved. Pressure regulator and pipelines are designed for the special demand.
3Gas manifold 2x2 bundles Acetylene
Type: GMS-BKH-SSE-U13-25/1,5-SIMAX3-2x1
IBEDA gas manifolds for Acetylene comply with DIN EN 14114 and TRAC 204, 206 and 208. They are mounted on a stainless steel plate and are BAM tested and approved. The modular design provides highest flexibility in installation and ensures to meet the customer‘s requirement. The whole capacity range up to 1503 m3/h can be covered by this modular concept.
4Gas manifold 2x1 cylinder CO2
with automatic switch-over
Type: GMS-AU-M-BT-300/10-2x1
Mechanically controlled IBEDA gas manifolds for Oxygen and technical gases (priority circuit). The mechanical change-over is realized by the pressure level set at main pressure regulator. The control signal of the contact gauge can be sent to an alarm panel either with an optical or an audible signal indicating when cylinders/MCPs (multi cylinder packs) need to be changed.
5Gas manifold 2x2 cylinders Argon
Type: GMS-DV-BT-300/20-2x2
IBEDA gas manifolds for Oxygen and technical gases are mounted on stainless steel plates. All safety-relevant components are BAM tested and approved. The modular design provides highest flexibility in installation and ensures to meet the customer‘s requirement. The whole capacity range up to 3203 m3/h and cylinder or bundle pressures up to 300 bar can be covered by the modular concept.
6Gas manifold 2x3 bundels Oxygen
Type: GMS-DV-U13-300/20-2x3
IBEDA gas manifolds for Oxygen and technical gases are mounted on stainless steel plates. All safety-relevant components are BAM tested and approved. The modular design provides highest flexibility in installation and ensures to meet the customer‘s requirement. The whole capacity range up to 3203 m3/h and cylinder or bundle pressures up to 300 bar can be covered by the modular concept.
7Mobile gas manifold
single cylinder Acetylene incl. hanger
Type: GMS-SSE-U13-25/1,5-SIMAX3-1x1
IBEDA mobile gas manifolds offer custom solutions for mobile gas supply. All inherent safety devices comply with DIN EN 14114. The hanger ensures the secure mounting of the gas manifold at the MCP rack.
8Mobile gas manifolds 2x1 bundles Acetylene
for gas supply on-site incl. tapping points
Type: TGMS-BKH-SSE-U13-25/1,5-SIMAX-2x1-GEV5
IBEDA mobile gas manifolds with integrated tapping points offer custom solutions for mobile gas supply. Up to six workstations can be supplied simultaneously from two MCPs. All inherent safety devices comply with DIN EN 14114.
9Tapping point for flame spraying cabinets
Type: E1-AL
IBEDA supplies tapping points for the gas supply, matched to the gas type, the working pressure and the flow rate. Operating pressures for Acetylene up to 2.5 bar and Oxygen or technical gases up to 60 bar. Flow rates up to 200 m3/h are standard. Customised solutions can be offered.
10Tapping point for heating burners
Type: E10
IBEDA supplies tapping points for the gas supply, matched to the gas type, the working pressure and the flow rate. Operating pressures for Acetylene up to 2.5 bar and Oxygen or technical gases up to 60 bar. Flow rates up to 200 m3/h are standard. Customised solutions can be offered.
11THE COMPACT GAS MIXER
MINI PGM-CS FOR TWO GASES
The new Mini PGM-CS is offered for the mixture of 2 different inert gases, such as Argon and CO2. It allows users to mix their own gases at almost any ratio needed to fit their process requirements! Mixing your own gas allows for greater control of the mixed ratio and will save users money vs. purchasing pre-mixed gas.
The Mini PGM-CS offers the established IBEDA quality and safety. It is easy to install and to use.
Gas types:
- Argon/CO2
- Argon/Helium
- Argon/Oxygen
12Tapping points for welding machines
Type: E1
IBEDA supplies tapping points for the gas supply, matched to the gas type, the working pressure and the flow rate. Operating pressures for Acetylene up to 2.5 bar and Oxygen or technical gases up to 60 bar. Flow rates up to 200 m3/h are standard. Customised solutions can be offered.
13Tapping points for cutting machines
Type: E1 and E10
IBEDA supplies tapping points for the gas supply, matched to the gas type, the working pressure and the flow rate. Operating pressures for Acetylene up to 2.5 bar and Oxygen or technical gases up to 60 bar. Flow rates up to 200 m3/h are standard. Customised solutions can be offered.
14Tapping point Nitrogen for testing unit PV-GD
Type: E1
IBEDA supplies tapping points for the gas supply, matched to the gas type, the working pressure and the flow rate. Operating pressures for Acetylene up to 2.5 bar and Oxygen or technical gases up to 60 bar. Flow rates up to 200 m3/h are standard. Customised solutions can be offered.
The IBEDA gas manifolds ensure the continuous supply of technical gases from the gas cylinder or bundle to the point of use. Additionally, we supply all components for mobile and stationary manifolds, such as high-pressure non-return valves, gas stations, tapping points, gas mixers, safety devices and accessories. All safety-relevant components are BAM tested and approved. Due to the modular concept, the gas manifold station can easily be extended to meet the customer's requirement.