Gas tapping points - stationery, mobile and special tapping points

gas tapping points e1 e10 e1 al

Tapping points are used for the gas withdrawal from a ring line at the respective work places (single work place supply) in the central gas supply. Due to the possible combination of individual components, the modular system can be used for almost all technical gases and for different pressure ranges.

The gas supply at cutting machines or large heating burners can be realised easily by selecting the proper design (such as tapping point E10).

Tapping points E1, E1AL, and E10 are intended for wall installations.

The IBEDA tapping points are equipped with a shut-off valve, and are usually used with a pressure regulator matched to the gas type. Furthermore, appropriate safety devices are used for fuel gas and oxygen (flashback arrestors). As an option, and in order to make the operation easier, IBEDA quick-action couplings can be installed.

Wall brackets are available that allow the installation of one and up to four tapping points. Upon request, special combinations can be offered. Depending on the requirements, tapping points for different types of gases can be combined on one multiple bracket.

IBEDA tapping points are supplied with brazing or welding nipple appropriate for the respective connection to the ring line. Special tapping points, e.g., in panel form or mobile tapping distribution units (gas distributors), can be offered upon request and manufactured according to customer specifications.

 

tapping point e1

Tapping point MODEL E1

Tapping point MODEL E1

IBEDA tapping points are characterised by their compact design and their high operational reliability. The tapping points are supplied with connection body, shut-off valve, brazing or welding nipple, and swivel nut for the gas inlet side.

tapping point e10

Tapping point MODEL E10

Tapping point MODEL E10

The E10 tapping points with 1/2" connections are suitable for higher gas withdrawals. They are characterised by their compact design and their high operational reliability. The tapping points are supplied with connection body, shut-off valve, brazing and welding nipple, and swivel nut for the gas inlet side.

tapping point e1 al

Tapping point MODEL E1-AL

Tapping point MODEL E1-AL

IBEDA tapping points are characterised by their compact design and their high operational reliability. The tapping points are supplied with connection body, shut-off valve, brazing and welding nipple, and swivel nut for the gas inlet side.
The very space-saving E1-AL design allows the mounting flat onto the wall. This E1-AL tapping point is to be mounted onto a modern aluminium bracket and the outlets are pointing straight downward.

tapping point distributor gev 2x5

MOBILE GAS TAPPING POINTS DISTRIBUTOR MODEL GEV-2X5

MOBILE GAS TAPPING POINTS DISTRIBUTOR MODEL GEV-2X5

IBEDA gas distributors with a weather protection cover are used to supply five welding stations with fuel gas and oxygen on construction sites.
Tapping points and safety equipment are optional.

tapping points distributor gev5

MOBILE GAS TAPPING POINTS DISTRIBUTOR MODEL GEV-5

MOBILE GAS TAPPING POINTS DISTRIBUTOR MODEL GEV-5

IBEDA mobile tapping points are used for the mobile gas supply of welding and cutting stations with fuel gas and oxygen. Five workstations can be supplied simultaneously. Tapping point pressure regulator and safety devices must be ordered separately according to the application conditions.